Hob Repair: DIY Fixes and When to Call an Expert

If your electric hob is acting up, you don't have to panic. Most hiccups are easy to spot and can be solved with a few tools and a little patience. Below you’ll find the most common problems, step‑by‑step fixes, and clear signs that it’s time to book a professional from Wells Appliance Repairs.

Common Hob Problems and Simple Fixes

1. Hob won’t turn on. First, check the breaker or fuse box – a tripped breaker is the most common culprit. If the power is fine, look at the control panel for any burnt smells or loose wires. A quick visual inspection often reveals a loose connection that you can tighten yourself.

2. One or more burners are dead. Turn the hob off, disconnect it from the mains, and remove the burner cap. Most electric hobs have a removable heating element that can be unscrewed. Test the element with a multimeter; a reading of zero ohms means it’s good, anything higher indicates a fault. Replace the element if needed – you’ll find the exact match in our parts catalogue.

3. Hob keeps tripping the reset button. This usually means the element is overheating or there’s a short circuit. Clean any food debris around the element and the surrounding area – buildup can cause hot spots. After cleaning, reset the hob. If it trips again, the element is likely damaged and should be swapped out.

4. Uneven heating. Uneven heat often points to a faulty element or a loose connection inside the hob. Remove the element, inspect the contacts for corrosion, and clean them with a dry cloth. Re‑attach the element securely and test the hob.

5. Flickering or dim display. A weak power supply or a failing control board can cause display issues. Ensure the power cord is firmly plugged in and not damaged. If the problem persists, the control board may need replacement – a job best left to a qualified technician.

When to Call a Professional

Even with the best DIY spirit, some situations are safer handled by pros. If you notice any of the following, give us a call:

• Repeated tripping of the reset button after replacing the element.
• Visible cracks or damage to the glass top.
• Persistent smell of burning or smoke.
• Electrical work that requires opening the main housing or dealing with the wiring.
• Uncertainty about the correct replacement part.

Our certified technicians at Wells Appliance Repairs are fully insured and have the tools to diagnose and fix hobs quickly. We’ll schedule a visit, quote the work upfront, and get your kitchen back to normal without the guesswork.

In short, most hob issues can be tackled at home with a bit of caution and the right guidance. But when the problem goes beyond a simple element swap or the safety of your household is at stake, don’t hesitate to reach out. A fast, reliable repair is just a phone call away.